Intrepid V6-2.7L VIN R (2003)
Center Mounted Brake Lamp: Service and Repair
Center Mounted Brake Lamp Replacement
REMOVAL
1. Open hood, disconnect and isolate the battery negative cable.
2. Release decklid latch and open decklid.
3. Remove decklid cover.
Fig.6 CHMSL - Intrepid
4. Disconnect lamp socket from housing.
5. Remove bulb from socket.
INSTALLATION
1. Install bulb into socket.
2. Install socket into housing.
3. Connect negative battery cable and close hood.
4. Verify CHMSL operation.
5. Install decklid cover.
