Intrepid V6-2.7L VIN R (2003)
Spot Lamp: Description and Operation
SPOT LAMP ASSEMBLY - POLICE
Fig.50 Spot Lamp Assembly Location
Fig.51 Spot Lamp Assembly
This vehicle may be equipped with up to two spot lamp assemblies, attached to the A-Pillars (Fig. 50). The spot lamp assembly switch is located on the
handle (Fig. 51), just above the rotating handle grip.
Each spot lamp assembly contains a 100 watt halogen bulb. The spot lamp assemblies are fused individually and powered hot at all times. There are
three fuses in the Power Distribution Center (PDC) that control the spot lamp assemblies:
-
Fuse F - IP ACC3/SPOT LPS - 50 amp
-
Fuse X - SPOT LP LT - 20 amp
-
Fuse Y - SPOT LP RT/UNDERHOOD - 20 amp
The parts available for service are:
-
Complete spot lamp assembly
-
FI3 100 watt halogen bulb.
-
Inside control handle w/switch.