Intrepid V6-2.7L VIN R (2003)
Evaporative Emission Control Canister: Testing and Inspection
P0441-EVAP Purge System Performance
Test 1 - 2
Test 3
SYMPTOM
P0441-EVAP PURGE SYSTEM PERFORMANCE
WHEN MONITORED
Cold start test. Engine Running. Small Leak Test Passed.
SET CONDITION
The PCM activates the EVAP Purge solenoid gradually increases to maximum flow. During flow, the PCM looks for the NVLD switch to close. If
the PCM does not see the NVLD switch close at maximum flow an error is detected. Two Trip Fault.
POSSIBLE CAUSES
-
Good Trip Equal To Zero
-
Intermittent Condition
-
Checking EVAP Purge Solenoid Functionality
-
EVAP Purge Solenoid Vacuum Supply