Intrepid V6-2.7L VIN R (2003)
7. Remove the 2 nuts attaching the power steering fluid cooler to the radiator lower crossmember.
8. Remove the power steering fluid cooler from the radiator lower crossmember.
INSTALLATION
1. Install the power steering fluid cooler on the radiator lower crossmember.
2. Install the 2 nuts attaching the power steering fluid cooler to the radiator lower crossmember. Tighten the attaching nuts to a torque of 10 Nm (89
inch lbs.)
3. Install the air dam on the radiator lower support. Attach the air dam to the radiator lower support using new retaining clips.
