Intrepid V6-2.7L VIN R (2003)
Windshield Washer Motor: Service and Repair
REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove the left headlamp assembly and set aside. Refer to Electrical, Lamps/Lighting - Exterior, Headlamp Unit (Intrepid), REMOVAL.
Washer Reservoir Removal
3. Remove the four retaining bolts to the washer reservoir.
4. Disconnect the pump and sensor wire connectors.
5. Disconnect the washer hose.
6. Disconnect the washer filler hose.
7. Pivot the inboard side of the reservoir forward and lift out of vehicle.
Fig. 10 Washer Reservoir
