Intrepid V6-2.7L VIN U (2000)
Turn Signal Flasher: Service and Repair
The combination flasher is located on the left side of the instrument panel, underneath, between the junction block and the brake pedal.
Negative Battery Cable Remote Terminal
REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
NOTE: It may be necessary to remove the left side lower instrument panel cover to gain access to Combination Flasher. See: Instrument Panel,
Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and Repair
2. Slide the Combination Flasher rearward to remove from the electrical bracket.
INSTALLATION
For installation, reverse the above procedures.
