Intrepid V6-201 3.3L (1995)
Key Reminder Switch: Description and Operation
The Key-In chime is used to indicate to the operator that the key is in the ignition with the driver's door OPEN. If the key is in the ignition, a ground path
is completed from the G26 circuit at the Body Control Module (BCM),through the CLOSED switch, to the Z1 circuit. The Z1 circuit is the ground
circuit and terminates at the body ground located at the left kick panel.
When the driver's door is open the normally OPEN door ajar switch CLOSES completing a path to ground on circuit G75. The BCM processes this
information and turns on the chime.
