Intrepid V6-201 3.3L (1995)
Door Lamp: Description and Operation
The door courtesy lamps receive power from the 10 Amp fuse, located in the junction block, on the M1 circuit. This fuse is the Ignition-Off Draw (IOD)
fuse and is located in cavity 13. This circuit is HOT at all times. The lamps are illuminated two different ways.
One way is through the Body Control Module (BCM) and the door ajar switches. When the door is opened, the door ajar switch CLOSES completing a
path to ground. The BCM then process this information and grounds the M2 circuit which is the ground circuit for the lamps.
The second way is through the dimmer control switch in the instrument panel. When the dimmer control is moved to the high end of travel, past the
detent, the interior lamps and door courtesy lamps are turned ON. This is accomplished when the switch in the control is CLOSED connecting circuits
L7 and M32. Circuit M32 connects from the switch to the BCM.
The BCM, after receiving this input from the switch, grounds the M2 circuit. The M2 circuit is spliced and connects to all the interior lamps and the door
courtesy lamps.
