Intrepid V6-201 3.3L (1995)
Hazard Flashers: Description and Operation
Power for the hazard flashers is provided on circuit L9 from the Power Distribution Center (PDC). The L9 circuit is protected by a 20 Amp fuse located
in cavity F1 of the PDC. Power for the fuse is supplied on circuit A15 which is a direct feed from the battery positive terminal. Circuit A15 is protected
by a fusible link. This circuit is HOT at all times.
Circuit L9 connects from the PDC to the turn signal/hazard switch. When the operator turns the hazard flashers ON circuits L9 and L55 are connected
internal to the switch. Circuit L55 connects to the combo flasher and provides battery voltage to the flasher.
The L32 circuit connects between the combo flasher and the BUS bar that powers circuit L60 and L61 internal to the multi-function switch.
When the hazard flashers are ON the multi-function switch connects circuit L32 to circuits L6O and L61. It also connects circuits L91 and Z1. Circuit Z1
is the ground path for the combination flasher and terminates at the Airbag Control Module (ACM) bracket.
Circuit L60 supplies voltage for the right side lamps and circuit L61 powers the left side lamps. These circuits also splice and supply voltage for the
indicator lamps in the instrument cluster.
