dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Technician Safety Information|Page 2928 > < Diagram Information and Instructions|Page 2925
Page 1
background image

Body Controller: Technician Safety Information

DANGER!!! Engines produce carbon monoxide that is odorless, causes slower reaction time, and can lead to serious injury. When the engine is
operating, keep service areas WELL VENTILATED or attach the vehicle exhaust system to the shop exhaust removal system.

Set the parking brake and block the wheels before testing or repairing the vehicle. It is especially important to block the wheels on front-wheel drive
vehicles; the parking brake does not hold the drive wheels.

When servicing a vehicle, always wear eye protection, and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent
electrical contact.

When diagnosing a body system problem, it is important to follow approved procedures where applicable. Following these procedures is very important
to the safety of individuals performing diagnostic tests.

Servicing Sub-Assemblies

Some components of the body system are intended to be serviced in assembly only. Attempting to remove or repair certain system sub-components may
result in personal injury and/or improper system operation. Only those components with approved repair and installation procedures should be serviced.

Technician Safety Information|Page 2928 > < Diagram Information and Instructions|Page 2925