Intrepid V6-201 3.3L Flex Fuel (1994)
Fig. 6 Install Crankshaft Oil Seal
1. Install new seal by using Tool C-4992 (Fig. 6).
2. Place seal into opening with seal spring towards the inside of engine. Install seal until flush with cover.
Fig. 7 Installing Crankshaft Pulley
3. Install crankshaft pulley using plate L-4524, Thrust Bearing/washer and 5.9 inch bolt (Fig. 7).
4. Install accessory drive belt. Refer to Cooling System for installation procedure.
5. Install fan module.
6. Connect battery.
