dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Pressure Regulator - Installation Procedure|Page 3889 > < Fuel Pressure Check Valve|Description and Operation
Page 1
background image

Fuel Pressure Regulator: Technical Service Bulletins
Fuel Pressure Regulator - Installation Procedure

NO.: 14-16-93

GROUP: Fuel Systems

DATE: Oct. 22, 1993

SUBJECT:
Fuel Pressure Regulator Installation

MODELS:

1993

(AC) Dynasty/New Yorker/New Yorker Salon
(AY) Imperial/New Yorker Fifth Avenue
(AS) Caravan/Grand Caravan/Caravan CV

Voyager/Grand Voyager/Town & Country

1993 - 1994

(LH) Concorde/Intrepid/Vision

1994

(LH) LHS/New Yorker

NOTE:
THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH THE 3.3L AND 3.5L ENGINE.

DISCUSSION:

When replacing the fuel pressure regulator for any reason, it is important that the installation be done in the correct manner. Incorrect installation could
result in diagnosing the regulator as defective and result in an inappropriate replacement.

The removal and installation instructions listed in the Service Manual for the Fuel Pressure Regulator provide the information to correctly perform the
procedure.

However, when removing the fuel pressure regulator, the O-rings may remain attached to the regulator. They must be removed from the regulator and
separately installed into the fuel rail cavity. When installing the O-rings, apply a light coat of clean engine oil and seat them into the cavity before
inserting the regulator (see illustration).

POLICY: Information Only.

Fuel Pressure Regulator - Installation Procedure|Page 3889 > < Fuel Pressure Check Valve|Description and Operation