Intrepid V6-201 3.3L Flex Fuel (1994)
INSTALLATION
1.
Using a new gasket, install the throttle body to the intake plenum. Torque the mounting bolts to 19 ft-lbs (26 Nm).
2.
Connect IAC motor and TPS electrical connectors.
3.
Rotate throttle to wide open position. Install throttle cable and speed control cable.
4.
Connect purge hose to throttle body.
5.
Install the air cleaner resonator to the throttle body. Connect PCV make up air hose.
6.
Connect the battery negative terminal.
