dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Door Panel > < Door Check Straps - Snapping Noise When Cold|Page 8291
Page 3
background image

4.

Remove screw holding check strap to door hinge **and discard**.

5.

Separate check strap from vehicle.

6.

Place revised check strap in position on vehicle.

7.

Install screw, **p/n 06504590**, holding check strap to door hinge.

8.

Install screws, p/n 06504837AA, to hold check strap to door end frame.

9.

Install door trim panel.

10.

Repeat procedure on other doors as necessary.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No:

23-40-27-90 Replace, Right Front

0.3 Hrs.

23-40-27-91 Replace, Left Front

0.3 Hrs.

23-40-27-92 Replace, Right Rear

0.3 Hrs.

23-40-27-93 Replace, Left Rear

0.3 Hrs.

FAILURE CODE:

P8 - New Part

Front Door Panel > < Door Check Straps - Snapping Noise When Cold|Page 8291