Intrepid V6-215 3.5L (1995)
Sunroof / Moonroof Motor: Service and Repair
NOTE: The numbered call-outs in the following service procedure refer the numbered parts found in the exploded view diagram.
REMOVAL
1. Remove headlining as necessary to gain access to drive motor (48).
2. Disengage drive motor wire connector from sunroof controller.
3. Remove bolts (47) holding drive motor to sunroof module.
4. Separate drive motor from sunroof module.
INSTALLATION
1. Place drive motor (48) in position on sunroof module.
2. Install bolts (47) to hold drive motor to sunroof module.
3. Engage drive motor wire connector into sunroof controller.
4. Install headlining.
