Intrepid V6-215 3.5L (1995)
Timing Belt Installation
3. Install the timing belt starting at the crankshaft sprocket going in a counterclockwise direction. Install the belt around the last sprocket. Maintain
tension on the belt as it is positioned around the tensioner pulley.
4. Holding the tensioner pulley against the belt, install the tensioner into the housing and tighten to 28 Nm (250 in.lbs.). Each camshaft sprocket's
mark should still fall between the cover marks.
5. When the tensioner is in place, pull the retaining pin to allow the tensioner to extend to the pulley bracket.
Timing Belt Installation
6. Rotate the crankshaft sprocket 2 revolutions and check the timing marks on the camshafts and crankshaft. The marks should line up within their
respective locations. If marks do not line up, repeat procedure.
