Intrepid V6-215 3.5L (1995)
Seat Belt Indicator: Description and Operation
The fasten seat belt indicator is used with the warning chime to tell the operator to fasten the seat belt. The seat belt switch is located in the drivers seat
belt buckle and is normally OPEN when the seat belt is buckled.
If the seat belt is not buckled, the switch CLOSES, and a ground path is completed on the G1O circuit to the Z1 circuit. The G1O circuit is connected to
the Body Control Module (BCM). When the ground path is complete a signal is sent over the CCD Bus to the instrument cluster.
This illuminates the lamp in the instrument cluster. Ground for the seat belt switch is terminated at the instrument panel left side cowl.
When the ignition switch is moved to the START position, the lamp is illuminated as a bulb check. Logic internal to the BCM determines the length of
time the lamp remains illuminated.
