Intrepid V6-215 3.5L (1995)
Fuel Line Quick Connect Fitting
3. Push fitting over fuel tube until retainer seats and a click is heard. When the fitting is properly locked retainer ears will be visible in the windows.
4. Verify connection by pulling on the fuel tube. If fitting locks in place connection is secure.
5. Using the DRB II select the Automatic Shut Down (ASD) Fuel System Test to pressurize fuel system and check for leaks. Refer to Powertrain
Management/Computers and Control Systems/Testing and Inspection/Procedures
CAUTION: Unless the test is stopped or the ignition switch is turned to the OFF position the fuel pump relay and the ASD relay will remain
energized for 7 minutes by the ASD Fuel System Test
METAL QUICK CONNECT FITTINGS
REMOVAL
Fuel Line Quick Connect Fitting
