Intrepid V6-215 3.5L (1995)
Arm/Disarm Switch: Description and Operation
There are two switches used to ARM and DISARM the Vehicle Theft Alarm (VTA) system. They are located in the left front and right front doors.
Power for the switches is supplied on circuit G73 from the Body Control Module (BCM). This circuit is spliced and supplies voltage to both switches.
Both switches are normally OPEN. When the switch closes it completes a path to ground on circuit Z1, which is the body ground, and terminates at the
instrument panel left kick panel. The BCM monitors the G73 circuit and when the switch is grounded it activates the VTA set procedure.
