Intrepid V6-3.2L VIN J (1998)
7. Install the side rail by placing one end between the piston ring groove and the expander. Hold end firmly and press down the portion to be installed
until side rail is in position. Do not use a piston ring expander during this step.
8. Install upper side rail first and then the lower side rail.
Figure 10 Upper And Intermediate Rings - Installation
9. Install No. 2 piston ring and then No. 1 piston ring.
Figure 11 Piston Ring End Gap Position
10. Position piston ring end gaps as shown in.
11. Position oil ring expander gap at least 45° from the side rail gaps but not on the piston pin center or on the thrust direction. Staggering ring gap is
important for oil control.