Intrepid V6-3.2L VIN J (1998)
Valve: Testing and Inspection
Figure 112-Intake And Exhaust Valves
1. Clean valves thoroughly and replace burned, warped and cracked valves.
2. Measure valve stems for wear.
NOTE: Valve stems are chrome plated and should not be polished
Figure 113 Measuring Valve Guide Wear
3. Remove carbon and varnish deposits from inside of valve guides with a reliable guide cleaner.
CHECKING VALVE GUIDES
1. Measure valve stem-to-guide clearance as follows:
2. Install valve into cylinder head so it is 15 mm (0.590 inch) off the valve seat. A small piece of hose may be used to hold valve in place.
Figure 114-Checking Oil Pump Cover Flatness
