Intrepid V6-3.2L VIN J (1998)
Catalytic Converter: Service and Repair
Figure 8-Front Exhaust Pipe Support-Left Side
RIGHT CATALYTIC CONVERTER
Removal
1. Raise vehicle on hoist.
2. Remove exhaust system.
3. Loosen or remove nut attaching right pipe to transaxle bracket.
4. Loosen extension pipe band clamp.
5. Remove right side converter extension pipe.
6. Lower vehicle.
Figure 5-Air Cleaner With Inlet Hose
7. Remove air cleaner assembly with air inlet hose.
8. Remove (Single Runner Valve) SRV vacuum reservoir and control valve assembly at right rear of engine. (3.2L Engine Only)