Intrepid V6-3.2L VIN J (1998)
Fuel Filler Hose: Service and Repair
Fuel Filler Hose
REMOVAL
1. Disconnect negative cable from battery. a
2. Drain fuel tank.
3. Remove 3 screws from filler neck to quarter panel.
4. Raise and support vehicle on host.
5. Loosen clamps at filler neck.
6. Remove filler neck.
INSTALLATION
1. Install filler neck to filler hose.
2. Tighten clamps.
3. Lower vehicle.
4. Install 3 screws to filler neck and quarter panel.
5. Fill tank and check for leaks.
6. Connect negative cable from battery.
