Intrepid V6-3.2L VIN J (1998)
ABS Main Relay: Description and Operation
ABS FUSES
The fuse for the ABS pump motor and the ABS system are located in the Power Distribution Center (PDC). The PDC is located on the drivers
side of the engine compartment forward of the strut tower. Refer to the diagram inside the PDC cover, for the exact location of fuses.
ABS RELAYS
On the Teves Mark 20 Antilock Brake System both the pump motor relay and the system relay are located in the Controller Antilock Brakes
(CAB). If either of the relays is diagnosed as not functioning properly the CAB will need to be replaced.
