Intrepid V6-3.2L VIN J (1998)
16. Install the intermediate shaft onto the steering column shaft. Install steering column coupler pinch bolt and tighten to a torque of 28 Nm (21 ft.
lbs.). Install the pinch bolt nut retaining pin in pinch bolt.
Reinforcement Attachment To Vehicle
17. Install the reinforcement on the vehicle. Install the 8 bolts, attaching the reinforcement to the strut towers. Install the bolt attaching the wiper
module to the reinforcement.
In-Line Resonator And Air Inlet Hose
18. Install the in-line resonator and inlet hose on the throttle body and air let hose coming from the lid of the air cleaner housing.
19. Install the covers over the wipes module and the cowl. Install and securely tighten the attaching screws.