Intrepid V6-3.2L VIN J (1998)
Spindle: Service and Repair
Installation
Spindle To Strut Assembly Pinch Bolt
1. Install the spindle on the strut assembly. Push and or tap spindle assembly onto strut, until notch in spindle is tightly seated against locating tap on
strut assembly. Then remove center punch from hole in spindle. Install the pinch bolt in the spindle. Tighten the pinch bolt to a torque of 53 Nm
(40 ft. lbs.).
Lateral Links To Spindle Attaching Bolt
2. Install the lateral links on the spindle. Install, but do not fully tighten attaching bolt at this time.
Trailing Arm To Bracket Bolt
3. Install bolt attaching trailing arm to trailing arm bracket on bottom of spindle. Do not fully tighten attaching bolt at this time.
