dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Instrument Panel - Clicking Sound|Page 6305 > < Stabilizer Link|Specifications|Page 6296
Page 1
background image

Strut / Shock Tower: Customer Interest
Instrument Panel - Clicking Sound

NO: 23-10-98

GROUP: Body

DATE: Mar. 13, 1998

SUBJECT: 
Clicking Sound on Right Side Top of Instrument Panel

MODELS: 
1998 (LH) Intrepid

SYMPTOM/CONDITION:

Clicking sound on right side, top of instrument panel, near lower windshield area.

DIAGNOSIS:

Test drive the vehicle on a rough road, if a clicking noise is present, perform the Repair Procedure.

PARTS REQUIRED:

1

06033688

Rivet, 1/4" Diameter

REPAIR PROCEDURE:

This bulletin involves installing a rivet in the right front shock tower.

1.

Remove air cleaner housing.

2.

Remove the battery ground cables from the shock tower.

3.

Center punch and drill one 1/4" hole in the right front shock tower (Figure 1). The hole should pass through the front shock tower reinforcement
and the front wheelhouse panel.

NOTE

AN ALUMINUM A/C LINE IS ROUTED NEAR THE 1/4" HOLE LOCATION. THE ALUMINUM A/C LINE MUST BE PROTECTED
DURING DRILLING AND RIVETING TO PREVENT DAMAGE.

4.

Coat the rivet with Mopar RTV Silicone Rubber Adhesive Sealant, p/n 04318025, and install from the engine compartment side.

Instrument Panel - Clicking Sound|Page 6305 > < Stabilizer Link|Specifications|Page 6296