Intrepid V6-3.2L VIN J (1998)
5. If vehicle is equipped with antilock brakes, remove the speed sensor cable routing bracket from the strut assembly.
6. Remove the 2 guide pin bolts mounting the caliper assembly to the steering knuckle.
7. Remove brake caliper assembly from steering knuckle and braking disc. Refer to the Brakes and Traction Control for the required caliper removal
procedure. Support caliper assembly by hanging it from frame of vehicle with wire or some other method, do not let caliper assembly hang by
brake hose. Remove front braking disc from hub.
CAUTION: The strut assembly to steering knuckle bolts are serrated were they go through strut assembly and steering knuckle. When removing
bolts, turn nuts off bolts DO NOT TURN BOLTS IN STEERING KNUCKLE. If bolts are turned damage to steering knuckle will result.
8. Remove the 2 strut assembly to steering knuckle attaching bolts.
