Intrepid V6-3.2L VIN J (1998)
Power Window Switch: Service and Repair
Switch Replacement
Negative Battery Cable Remote Terminal
Master Switch
REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove driver's door trim panel.
3. Remove three mounting screws.
4. Remove switch and disconnect wire connector.
INSTALLATION
-
For installation, reverse the above procedures.
Passenger Switch
REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove passenger door trim panel.
3. Disconnect switch wire connector.
4. Remove switch from bezel.
INSTALLATION
-
For installation, reverse the above procedures.