Intrepid V6-3.2L VIN J (1998)
Windshield Washer Reservoir: Service and Repair
Washer Reservoir
The content of this article reflects the changes called out by TSB 26-03-99.
REMOVAL
Negative Battery Cable Remote Terminal
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove the left headlamp assembly and set aside.
Washer Reservoir Removal
3. Remove the four retaining bolts to the washer reservoir.
4. Disconnect the pump and sensor wire connectors.
5. Disconnect the washer hose.
6. Disconnect the washer filler hose.
7. Pivot the inboard side of the reservoir forward and lift out of vehicle.
