Intrepid V6-3.5L VIN G (2002)
Thermostat: Testing and Inspection
DIAGNOSIS AND TESTING - ENGINE COOLANT THERMOSTAT
The thermostat is operated by a wax filled container (pellet) which is sealed so that when heated to a predetermined temperature, the wax expands
enough to overcome the closing spring and water pump pressure, which forces the valve to open. Coolant leakage into the pellet will cause a
thermostat to fail open. Do not attempt to free up a thermostat with a screwdriver.
The open too soon type failure mode is included in the on-board diagnosis. The check engine light will not be lit by an open too soon condition. If it
has failed open, a DTC diagnostic trouble code will be set. Do not change a thermostat for lack of heat by gauge or heater performance, unless a code
is present. Failing shut is the normal long term mode of failure, and normally, only on high mileage vehicles. The temperature gauge will indicate this
condition.
