Intrepid V6-3.5L VIN G (2002)
CAUTION: The hub and bearing axle retaining nut is a prevailing torque nut and cannot be reused. A NEW retaining nut MUST be used.
6. Install a NEW hub and bearing axle retaining nut on the stub shaft. Do not torque the hub nut at this time.
7. Coat speed sensor head with High Temperature Multipurpose E.P. Grease before installing into the steering knuckle. Install speed sensor head into
steering knuckle. Install screw and tighten to a torque of 7 Nm (60 inch lbs.)
8. Install the brake rotor back on the hub and bearing assembly.