Intrepid V6-3.5L VIN K (2003)
Front Door Latch: Service and Repair
LATCH
REMOVAL
1. Close door glass.
2. Remove door trim panel.
3. Remove water shield as necessary.
4. Remove rear glass channel.
5. Disconnect lock button link from door latch.
6. Disconnect lock cylinder link from door latch.
7. Disconnect outside door handle link from door latch.
Fig. 10
8. Remove screws holding door latch to door end frame (Fig. 10).
9. Remove latch from door.
INSTALLATION
1. Place latch in position in door.
2. Install screws attaching door latch to door end frame.
3. Connect outside door handle link to door latch.
4. Connect lock cylinder link to door latch.
5. Connect door lock button link to door latch.
6. Install rear glass channel.
7. Verify latch operation.
8. Install watershield.
9. Install door trim panel.