Intrepid V6-3.5L VIN K (2003)
Rear Door Striker: Service and Repair
LATCH STRIKER
REMOVAL
1. Open rear door.
2. Mark location of door latch striker on C-pillar to assist installation alignment.
Fig. 7
3. Remove bolts holding striker to C-pillar (Fig. 7).
4. Remove door latch striker from vehicle.
INSTALLATION
1. Place door latch striker in position on vehicle.
2. Install bolts attaching striker to C-pillar.
3. Align striker to marked location on C-pillar and tighten bolts.
4. Verify alignment and operation of door, adjust as necessary.