Intrepid V6-3.5L VIN K (2003)
Headliner: Service and Repair
HEADLINER
REMOVAL
1. Remove front passenger seat for ease of removal of headliner.
2. Remove right and left A-pillar trim panels.
3. Remove right and left sun visors. Do not remove sun visor retainers at this time.
4. Remove overhead console or front interior lights.
5. Disconnect wire harness along A-pillar and wire connector to the fuse panel.
6. Remove upper B-pillar trim panels.
7. Remove front and rear assist handles (if equipped).
8. Remove quarter trim upper panels partial, keeping belt attached.
9. Fully recline front seat.
10. Remove right and left sun visor retainers.
11. Disengage rear headliner locating clip, using Headliner Clip Pliers, Special Tool C-6967.
12. Pull headliner down, beginning from the rear. The back side of the headliner is glue bonded to the structural membrane and must be overcome.
NOTE: No special tools are required to release the membrane from the headliner. Pull down use hand force only to release the membrane.
Fig. 18
13. Remove headliner from vehicle through the rear door, using two people (Fig. 18).
