Intrepid V6-3.5L VIN K (2003)
Power Mirror Switch: Description and Operation
POWER MIRROR SWITCH
The mirror switch on the door trim panel operates both the outside rear view mirrors On vehicles equipped with Memory/Heated Seats, the Memory
Heated Seat Mirror Module (MHSMM) activates the drivers side mirror motor in recall mode.
Position sensing potentiometers are built into the drivers side mirror vertical and horizontal motor assembly These potentiometers provide a sense
voltage to the MHSMM that indicates where the actual location of the mirror is. If a memory position is set, the values of the potentiometers at that
location are stored in memory.
Fig.1 Memory and Heated Seat Switches
MEMORY SET SWITCH
The memory set/selector switch is mounted on the drivers seat cushion side shield, within easy reach of the driver. This switch is used to set new and
recall preset memory positions of seat, seat recliner, and the side view mirrors.
The memory set switch cannot be repaired or adjusted. If one switch is damaged or faulty the entire memory set switch must be replaced.
When the memory set/selector switch is depressed, a resistance signal is sent to the memory heated seat mirror module via hard wired connections.
The module than receives this hard-wired input and applies power to move the power seat track or side view mirrors according to the preset position.
When the memory system is in "set" mode a chime will be generated by the body control module.
See the owner's manual in the vehicle glove box for more information on the features, use and operation of the memory switch.
