Intrepid V6-3.5L VIN K (2003)
Brake Rotor/Disc: Description and Operation
Rear Disc Brakes
DESCRIPTION - REAR DISC BRAKES
The rear disc brakes are similar to front disc brakes, however, there are several distinctive features that require different service procedures. This
single piston, floating caliper rear disc brake assembly includes:
-
Disc brake caliper
-
Brake shoes (pads/linings)
-
Brake rotor
-
Disc brake caliper adapter
This vehicle is equipped with a caliper assembly that has a 36 mm (1.42 inch) piston.
The caliper assembly on all applications floats on rubber bushings using internal metal sleeves which are attached to the adapter using threaded guide
pin bolts.
The adapter and disc shield are mounted to the rear suspension knuckles of vehicle. The adapter is used to mount the brake shoes and actuating cables
for the parking brake system. The adapter also mounts the rear caliper assembly to the vehicle. The adapter has two machined abutments which are
used to position and align the caliper and brake shoes for movement inboard and outboard.
This vehicle uses a 14 inch solid non-vented rear disc brake rotor. It is a drum-in-hat style. It serves a dual purpose. The braking disc area of the rotor
functions as a normal brake rotor for disc brakes. The center section of the
OPERATION - REAR DISC BRAKES
Rear disc brakes operate similarly to front disc brakes. Refer to Front Disc Brakes for additional information.
