Intrepid V6-3.5L VIN K (2003)
6. Remove caliper assembly from steering knuckle. Proceed by first rotating top of caliper away from steering knuckle, then lifting caliper off bottom
machined abutment on steering knuckle. Take care not to lose the two rail shims.
7. If required, remove rotor from hub by pulling it straight off wheel mounting studs.
INSTALLATION - FRONT CALIPER
CAUTION: Use care when installing the caliper assembly on the steering knuckle, so seals on caliper guide pin bushings do not get damaged by the
steering knuckle bosses.
