Intrepid V6-3.5L VIN K (2003)
Cabin Temperature Sensor / Switch: Testing and Inspection
IN-CAR SENSOR ASPIRATOR MOTOR
1. Perform air flow test to check the aspirator motor assembly
a. Turn ignition to the ON position and push the OFF button to stop the ATC system airflow. This will make it easier to observe paper in step b.
Fig. 15 ATC In-Car Temperature Sensor
b. Place a small piece of newspaper in front of the aspirator motor opening on the ATC control. If the paper sticks to the opening, the in-car
sensor aspirator motor is operating properly. The piece of paper should be only large enough to cover the grille opening.
2. Check if the electrical connection and connector are OK.
