Intrepid V6-3.5L VIN K (2003)
Fuel Injector: Electrical Specifications
Control Circuit to Injector ................................................................................................................................................................................... 5.0 Ohms
Ground to Injector Control Circuit
(Harness Connector) .......................................................................................................................................................................................... 100 Ohms
Injector Test
(12 Volts applied to Injector) .................................................................................................................................................................... good if actuates
(With Test light or DRBIII Tool) ...................................................................................................................................... if no actuation replace injector
Caution: Powering the injector for more than a few seconds will permanently damage the injector. See Computer and Controls System/Injector
Control Circuit testing.