Intrepid V6-3.5L VIN K (2003)
record the DTC's, and erase theses DTC¡Çs prior to returning the vehicle to the customer. Erase DTC's using the following procedure:
a. Turn the vehicle¡Çs ignition key to the "RUN" position.
b. From the DRBIII scan tool Main Menu select # 1 "DRBIII Stand-Alone".
c. From the DRBIII scan tool Stand-Alone menu select # 3 "Vehicle Module Scan".
d. From the DRBIII scan tool Vehicle Module Scan menu select # 1 "1998 - 2007 Module Scan".
e. Select "YES" on the DRBIII scan tool key pad to scan for DTC's.
f.
Follow the instructions on the DRBIII scan tool screen.
g. Once the scanning process is complete, the DRBIII scan tool will display a list of all the modules. Modules on the list that have an asterisk next
to them have DTC's that need to be cleared.
h. Select the module that needs to have the DTC¡Çs cleared and follow the instructions on the DRBIII scan tool screen to clear the DTC's.
i.
Turn the vehicle¡Çs ignition key to the "OFF" position.
NOTE:
Erase any DTC's in the PCM only after all other modules have other modules have had their DTC's erased.
18. Disconnect the DRBIII scan tool from the vehicle.
19. Turn off the battery charger, disconnect it from the vehicle and then continue with Section B - Install the Authorized Modifications Label.
B. Install the Authorized Modifications Label:
1. Type or print (with a ballpoint pen) the recall number, repair modification, dealer code and date on the Authorized Modifications Label (Figure 1).
2. Attach the label near the VECI label and then close the hood.
C. Complete Proof of Correction Form for California Residents: This recall is subject to the State of California Registration Renewal/Emissions Recall
Enforcement Program. Complete a Vehicle Emission Recall Proof of Correction Form (Form No. 81-016-1053) and supply it to vehicle owners
residing in the state of California for proof that this recall has been performed when they renew the vehicle registration.
