Intrepid V6-3.5L VIN K (2003)
Seat Belt: Service and Repair
Seat Belt and Retractor - Rear Center
REMOVAL
WARNING: INSPECT THE CONDITION OF THE SHOULDER/LAP BELT. REPLACE THE RETRACTOR IF THE BELT IS CUT,
FRAYED, TORN, OR DAMAGED IN ANY WAY.
1. Remove the rear shelf trim panel.
Fig.12 Rear Seat Belt Retractor - Center
2. Remove the bolt attaching the center rear seat belt retractor to the rear shelf.
3. Remove the center rear seat belt retractor assembly from the vehicle.
INSTALLATION
WARNING: INSPECT THE CONDITION OF THE SHOULDER/LAP BELT. REPLACE THE RETRACTOR IF THE BELT IS CUT,
FRAYED, TORN, OR DAMAGED IN ANY WAY.
1. Install the center rear seat belt retractor assembly on the rear shelf. Torque the bolt to 40 Nm (30 ft. lbs.).
2. Install the rear shelf trim panel.
