Intrepid V6-3.5L VIN K (2003)
Steering Gear: Service and Repair
Removal and Installation
Removal
REMOVAL - POWER STEERING GEAR
1. Remove the battery ground cable from the ground stud on the shock tower and isolate the ground cable by installing the cable isolator on the
ground stud.
2. Position the front tires of the vehicle so that they are facing Straight-Ahead.
3. Using a steering wheel holding clamp, lock the steering wheel from rotating.
CAUTION: Before removing the steering column coupler from the intermediated steering shaft be sure the steering wheel is locked from
rotating. If the steering wheel is allowed to rotate freely after it is disconnected from the intermediated shaft, the clock spring will be damaged and
will need to be replaced.