Intrepid V6-3.5L VIN K (2003)
1. Install front strut assembly into shock tower. Install the 4 strut assembly upper mount to shock tower attaching nuts. Tighten the 4 strut mount to
strut tower attaching nuts to a torque of 37 Nm (28 ft. lbs.) torque.
2. Position steering knuckle into strut assembly.
CAUTION: The strut assembly to steering knuckle bolts are serrated were they go through strut assembly and steering knuckle. When installing
bolts, turn nuts onto bolts DO NOT TURN BOLTS IN STEERING KNUCKLE. If bolts are turned damage to steering knuckle will result.
3. Install the strut assembly to steering knuckle attaching bolts. Install nuts on attaching bolts. Tighten the strut assembly clevis to steering knuckle
attaching bolt nuts to a torque of 203 Nm (150 ft. lbs.).