Intrepid V6-3.5L VIN K (2003)
2. Position the strut assembly back in the vehicle with the 3 studs on the strut mount through the holes in the strut tower. Install the 3 strut mount to
body attaching nuts onto mounting studs. Tighten the 3 strut mount attaching nuts to a torque of 25 Nm (19 ft. lbs.).
3. Raise vehicle back up to working height for reconnecting lower strut.
4. Install spindle onto bottom of the strut assembly. Push or tap spindle assembly onto lower end of strut, until notch in spindle is tightly seated
against locating tab on strut assembly. Then remove center punch from hole in spindle. Install spindle to strut assembly pinch bolt into spindle.
Tighten spindle to strut assembly pinch bolt to 53 Nm (40 ft. lbs.).
