Intrepid V6-3.5L VIN K (2003)
7. Install rear wheel speed sensor into brake caliper adapter. Install head attaching bolt and tighten to 7 Nm (60 inch lbs.).
8. Install rear braking disc on hub. Carefully install rear brake caliper over braking disc and install on adapter. Tighten rear caliper assembly to
adapter mounting bolts to 22 Nm (192 inch lbs.).
9. Install wheel and tire assembly on vehicle. Then torque all wheel mounting stud nuts in proper sequence until all nuts are torqued to half
specification. Then repeat tightening sequence to full specified torque of 129 Nm (95 ft. lbs.).
10. Lower vehicle to the ground.
11. With the weight of the vehicle on the tires, tighten lateral link to spindle attaching bolt to 135 Nm (100 ft. lbs.).
12. Reconnect the radio speaker wiring to the rear speaker. Install rear radio speaker and mounting bracket using 4 screws.
13. Install both lower quarter and upper quarter trim panels.
14. Install the rear seat back, and seat cushion.
15. Check and reset rear wheel toe to specifications if required.
