Intrepid V6-3.5L VIN K (2003)
4. Install a lug nut on the wheel stud to be removed from the hub and bearing assembly so the threads on stud are even with end of lug nut. Install
Remover, Special Tool C-4 150, on hub and bearing assembly flange and wheel stud.
5. Tighten down on special tool to push wheel stud out of the hub and bearing assembly. When shoulder of wheel stud is past flange, remove special
tool from hub and bearing assembly. Remove lug nut from stud and remove wheel stud from flange.
INSTALLATION
1. Install wheel stud into of hub and bearing assembly from the rear. Install washers on wheel stud, then install a wheel lug nut on stud with flat side
of lug nut against washers.
2. Tighten the wheel lug nut, pulling the wheel stud into the flange of the hub and bearing assembly. When the head of the stud is fully seated against
the bearing flange, remove lug nut and washers from wheel stud.
