Intrepid V6-3.5L VIN V (2002)
Seat Heater Switch: Service and Repair
Passenger Heated Seat Switch Replacement
REMOVAL
Negative Battery Cable Remote Terminal
1. Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
Memory And Heated Switch Location
2. Remove the appropriate seat cushion side shield. Refer to the Body section for the procedure.
3. Working from the underside of the switch, gently rock the switch back and forth out of its mounting location.
INSTALLATION
1. Gently rock the switch back and forth in to its mounting location.
2. Install the appropriate seat cushion side shield. Refer to Body for the procedure.
3. Connect the remote negative battery cable.
