Intrepid V6-3.5L VIN V (2002)
Brake Bleeding: Service and Repair
Standard Procedure - Pressure Bleeding
PRESSURE BLEEDING SEQUENCE
The following wheel circuit sequence for bleeding the brake hydraulic system should be used to ensure adequate removal of all trapped air from the
brake hydraulic system.
-
Left rear wheel
-
Right front wheel
-
Right rear wheel
-
Left front wheel
PRESSURE BLEEDING METHOD
NOTE: Follow pressure bleeder manufacturer's instructions for use of pressure bleeding equipment.
1. Remove filler cap from the top of fluid reservoir on master cylinder.
2. Install Adapter, Special Tool 8224, in the caps place on the reservoir.
3. Attach Bleeder Tank, Special Tool C-3496-B, or equivalent, to Special Tool 8224. Pressurize the system following the pressure bleeder
manufacturer's instructions.
4. Remove rubber dust caps from all 4 bleeder screws.