Intrepid V6-3.5L VIN V (2002)
9. Install the wheel and tire assemblies.
10. Tighten the wheel mounting stud nuts in proper sequence until all nuts are torqued to half specification. Then repeat the tightening sequence to the
full specified torque of 135 Nm (100 ft. lbs.).
11. Lower vehicle.
CAUTION: After performing any service to the vehicle brake system, be sure to obtain a firm brake pedal before moving vehicle.
12. Pump the brake pedal several times to ensure the vehicle has a firm brake pedal to adequately stop vehicle.
13. Check and adjust the brake fluid level as necessary.
14. Road test the vehicle and make several stops to wear off any foreign material on the brakes and to seat the brake shoe linings.
